Why does my IKEA UPPSPEL Indoor Furnishing show Error Code H01?
Error code H01 on your IKEA Indoor Furnishing indicates overheating. Unplug the desk from the wall socket, then plug it back in. Alternatively, allow the motors to cool for 18 minutes before using them again.
What does Error Code E01 mean on IKEA UPPSPEL Indoor Furnishing?
Error code E01 on your IKEA Indoor Furnishing indicates overcurrent protection or a short circuit. Refer to the instructions for Reset/Initialization to resolve this issue.
Why does my IKEA UPPSPEL Indoor Furnishing desk stop and only go in reverse?
If your IKEA Indoor Furnishing desk stops and only moves in the opposite direction, it might be at its upper limit. When the desk reaches its highest position, it can only move downwards. Also, try removing some of the load from the desk and try again.
What does Error Code E07 mean on my IKEA UPPSPEL?
Error code E07 on your IKEA Indoor Furnishing indicates a motor line open circuit error. Refer to the instructions for Reset/Initialization to resolve this issue.
How to fix an IKEA Indoor Furnishing desk that won't move?
If your IKEA Indoor Furnishing desk does not move, try connecting a lamp to the main power supply to verify the supply voltage is working. Check all connections according to the assembly instructions. If parts are damaged, contact IKEA Customer Service to exchange them.
Why does my IKEA UPPSPEL desk move a little then stop?
If your IKEA Indoor Furnishing desk only moves a little bit upwards and then stops, check that all screws used have the correct length according to the assembly instructions, as long screws can damage the leg. Also, check all connections. Try reducing the weight load on the desk and try again; you might need to perform a Basic setting before the desk moves upwards.
How to adjust the height limit on my IKEA UPPSPEL Indoor Furnishing desk?
If your IKEA Indoor Furnishing desk does not move up to its fully raised position and always stops at the same spot, perform Basic settings to remove this stop.
Why will my IKEA UPPSPEL desk only move down?
If your IKEA Indoor Furnishing desk will only move downwards even though it is not overloaded, perform Basic settings.
What to do if my IKEA UPPSPEL shows Error Code RST?
Error code RST on your IKEA Indoor Furnishing indicates a power failure. Refer to the instructions for Reset/Initialization to resolve this issue.
What does Error Code 888/000 mean on IKEA UPPSPEL?
Please contact IKEA Customer Service regarding the Error Code 888/000 on your IKEA Indoor Furnishing.
General| Product Type | Gaming Desk |
|---|---|
| Height Adjustable | Yes |
| Color | Black |
| Width | 160 cm |
| Depth | 80 cm |
| Material | Particleboard, Steel |
| Dimensions | 160 cm x 80 cm |
| Min. height | 72 cm |
| Max. height | 120 cm |
To Next Page
