E01
E02
E07
E08
E13
RST
LOC
ERROR CODE INSTRUCTIONS
Error Code
Reason
Solution
Overcurrent
protection/short circuit
Hall circuit failure
Legs height deviation
over 2cm
Power failure
Controller shows LOC,
desk stop working
See instructions for Reset/Initialisation
.
Unplug from the wall socket and re-plug
or wait 18 minutes to let the motors cool before using them
again.
This is not a problem, caused by misoperation.
Press button for 8 seconds to unlock handset.
See instructions for Reset/Initialisation.
Remove the load from table top.
See instructions for Reset/Initialisation.
H01
Over-heating
See instructions for Reset/Initialisation
.
The crossed-out wheeled bin symbol indicates that the item should be disposed of
separately from household waste. The item should be handed in for recycling in
accordance with local environmental regulations for waste disposal. By separating a
marked item from household waste, you will help reduce the volume of waste sent to
incinerators or land-lls and minimise any potential negative impact on human health
and the environment. For more information, please contact your IKEA store.
To Next Page
Loading...
