BEFORE OPERATING
EN
2.Before the Over the Range Microwave Oven can be
used, follow these procedures:
• Plug in the oven. Close the door. The oven display
will show 12:00.
• If no operation after 1 minute, the oven will show
12:01.
3. Set clock. See below.
TO SET THE TIMER
STOP/CANCEL
STOP/CANCEL STOP/CANCEL to:
1. Erase if you make a mistake during programming.
2. Cancel timer and the signal after cooking.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, press twice.
• Set the timer for 3 minutes.
TO SET THE CLOCK
• Suppose you want to enter the correct time
of day 12:30 (A.M or P.M.).
1 2 3
Display Shows:Touch
0
2.
3.
1.
3 0 0
2.
1.
3.
Display Shows:Touch
Then time will count down
NOTE
1. Opening the door during timer countdown will not
pause the running timer.
2. To cancel the active timer, press the Timer On/Off
key once.
1.Before operating your new oven make sure you read
and understand this User Manual
completely.
To Next Page
Loading...
