IKUtrax MXSP-BTS150 - SPECIFICATIONS

SPECIFICATIONS
General Specifications
Compatible I/O
Bluetooth v3.0 (Class II: 10m range)
Support Profile
HSP, HFP, A2DP, AVRCP
Output Frequency Range
2.400~2.484 GHz
Frequency Hopping
FHSS（Frequency Hopping Spread Spectrum）
Bluetooth PIN code
0000(simple pairing)
Water Proof
IPx5
Multi-point
Support two devices
Paired device
4
RF Performance
Max. +4dBm Class 2
Near Field communication
Yes
Speaker Specifications
Rated Impedance
4Ω ± 15%
Resonant FREQ.(fo)
150Hz ± 30Hz
Output S.P.L
78dB ±2dB (1M/W @1KHz)
Rated FREQ. Range
150Hz~20KHz
Rated Power Input
2.5W+2.5W
Max. Power Input
5W
Microphone/ Audio input Specifications
Sensitivity
-42dB
Output Impedance
2.2KΩ
S/N Ratio
58dB
Electrical Specifications
Supply Voltage
5V
Battery Capacity
950mA
Power Charge Consumption
450mA
Standby Power Consumption
1~2mA
Music play/ Phone call Power Consumption
1/8 rated power: 8 hours
Power Off Standby Time
120 hours
Battery Charge time
2.5 hours
At Maxell, environmental and social responsibility is a core value of our business. We are dedicated to
continuous implementation of responsible initiatives with an aim to conserve and maintain the environment
through responsible recycling.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Hitachi Maxell Global Ltd. is under license. Other trademarks and trade names are those of their
respective owners.