For more details, please visit www.iliferobot.com 15
Troubleshooting
When the Wet & dry vacuum cleaner does not work properly, please refer to
the following information to handle the situation
Abnormal Situations
The machine does
not work
1. The battery is low. Please use it after charging.
2. The air channel and the roller get blocked.
Please clean up the foreign objects in time and
restart the machine.
3. The Waste Water Tank is full. Please clean!
1. The air channel and the roller get blocked by
foreign objects. Please clean up in time and
restart the machine.
2. The Waste Water Tank is not properly installed.
Please check the components and reinstall it.
3. The sponge filter of the Waste Water Tank
is dirty. Please clean!
4. The battery is too low. Please charge!
1. Check whether the power adapter is plugged
in properly.
2. The battery is fully charged and enters the
sleep state.
Suction declines with
abnormal sounds.
The light is not on
when charging.
Reasons and Solutions
EN
To Next Page
Loading...
