What to do if Ilife V5x Vacuum Cleaner cliff sensor or bumper sensor fails?
If the cliff sensor or bumper sensor fails, clean the cliff sensor and shake the bumper slightly to check for any foreign matter.
What to do if my Ilife V5x main body gets stuck?
If the main body gets stuck, move the main body and start it again.
Covers essential safety warnings and precautions for operating the robot vacuum.
Details all items included in the product package, with quantities.
Identifies and illustrates the different parts of the robot vacuum.
Describes the dustbin, charging dock, and remote control components.
Explains the meaning of different light indicators on the robot's CLEAN button.
Explains how to use the remote control buttons for various functions.
Guides on initial setup, placing the charging dock, and connecting the adapter.
Provides instructions on charging the robot, including first-time use and extending battery life.
Details how to start, pause, and manage the robot's sleep mode.
Explains how to set schedules and use different cleaning modes.
Details Auto cleaning, Spot cleaning, and Edge cleaning modes.
Instructions for cleaning side brushes, dustbin, filter, sensors, and charging pins.
Provides steps for cleaning the robot's nose wheel.
Lists error codes, their causes, and solutions based on beep tones.
Describes common error appearances and their troubleshooting steps.
General| Dust Collection Type | Bagless |
|---|---|
| Battery Type | Lithium-ion |
| Battery Capacity | 2600 mAh |
| Battery Life/Run Time | 120 minutes |
| Dust Bin Capacity | 0.3 liters |
| Suction Power | 1000 Pa |
| Climbing Ability | 15 mm |
| Type | Robotic Vacuum Cleaner |
| Charging Time | 300 minutes |
| Dimensions | 30 x 30 x 7.5 cm |
| Features | Scheduled Cleaning |
| Noise Level | 65 dB |
| Cleaning Modes | Auto, Spot, Edge |
| Filter Type | HEPA Filter |
To Next Page
