How to Use
3.Schedule
You can schedule to let the robot start cleaning from a certain time.
Note:
Remember to set the clock time and schedule once replace the
remote-control battery. Once the clock time is set, any scheduling
you have set will make robot
work on the scheduled time.
Setting the clock time
1.
Point the remote control at robot (make sure the power switch is
on).
2.
Press CLOCK and then use directional buttons to set the correct
time.
3.
Press CLOCK to save the setting. To cancel the schedule,
please turn off
the robot.
Setting a schedule
The robot will always work at the scheduled time unless power switch
of the robot
is turned off.
1.
Point the remote towards the robot.
2.
Press PLAN and then use directional buttons to set the schedule.
3.
Press PLAN to save the setting. To cancel the schedule, please turn
off the robot.
Note:
When you set the clock time or schedule, the final operation will
be confirmed
by beep from robot; If no tone received, your
setting is unsuccessful.
To Next Page
Loading...
