How to Use
4.
Cleaning mode
1>. Auto cleaning
The robot will clean a room automatically and adjust its cleaning according
to the
situation.
Note: Press CLEAN button on robot or remote control to start Auto
Cleaning.
2>. Spot cleaning
A.
Press Spot on the remote towards the robot when the robot is
working.
The robot will circle around and turn into Auto clean mode after
Spot clean is
finished.
B.
Press Spot on the remote towards the robot when the robot is in
selected mode and the robot will begin to circle around. The robot
will turn into selected mode
after Spot clean is finished.
3>. Edge cleaning
Put the robot near the edge (wall) and press EDGE on remote control
to start
edge cleaning.
Note: Edge cleaning will automatically stop when robot could not
detect any edges. or you could manually press CLEAN to stop
edge cleaning.
To Next Page
Loading...
