How to Use
2.
Start/Pause/Sleep
Sleep mode: robot is not working, light at CLEAN button is off and
power switch is on.
Selected mode: robot is not working, blue light at CLEAN button
fades in and out. Cleaning mode: robot is working, blue light at
CLEAN button turns solid.
1>. Starting up
A.
Make sure the power switch is on.
B.
Press CLEAN button on robot or remote control to start
cleaning.
Note: If robot is in sleep mode, press CLEAN button to restart it
from sleep mode.
Press CLEAN button again to start the cleaning cycle.
2>. Pause
Press CLEAN button on robot or remote control to change from
Clean mode to
selected mode.
Note: When robot is paused, press CLEAN button to
restart the cleaning cycle.
3>. Sleep
Change from selected mode to sleep mode:
Robot automatically enters sleep mode if no command is
received after 10 mins.
For More detailed information, please visit: wwww.iliferobot.com
To Next Page
Loading...
