iLive IS208B - Docking an iPod

Docking an iPod
7
1. Locate the numbered Bracket that ts the iPod that will be docked.
Each included Bracket has a number on it, indicating which iPod model that
bracket is compatible with. See the separate bracket chart page to identify which
bracket is needed.
2. Snap the Bracket into place over the iPod connector in the Docking Station.
 AllBracketswillonlytonewayontotheDock.
WheninsertinganiPodnano(rstorsecondgeneration),slidetheDock
connectionontheunitsothatitmatchestheopeningontheiPodnano(rstor
secondgeneration).
3. Connect the iPod to the iPod connector inside the Docking Station.
Once an iPod is connected to the Docking Station, the unit will play and charge
the docked iPod.
iPod
Bracket
Docking Station