Page 11
Issue: 1.4 Author: JPB Date: 18/1/2013
To edit a Device Label:-
1. Press enter to access the user menu
2. If the panel asks for a code, type 123
3. Select option 5 (Engineer)
4. If the panel asks for a code enter the engineer code 369
5. Select option 3 (Device ID)
6. Press prev/next to select desired device
7. Press enter to select cursor
8. Enter text
9. Press next to select next device to be edited.
To jump to a specific device (Eg to change the description of a device on a
system that has already been configured):-
From the Device ID screen, press 1
The panel prompts for a zone and ID. Enter the zone & ID of the device to be
edited.
To Next Page