Stereo Audio System for Your iPod V10M10_IM_EN_12072007
www.i-Luv.com - 23 -
BluePin
TM
Setup and operating Instructions-continued
z Make a call: (three different ways)
{ Simply dial the telephone number from cell phone to make a phone call.
{ Press the PAIRING button of BluePin
TM
, or press the SPEAKERPHONE/CALL button of i399/i398 or press the call button on
remote control to make the voice call.
{ Press and hold the PAIRING button of BluePin
TM
or the SPEAKERPHONE/CALL button of i399/i398 or press the call button on
remote control for three (3) seconds to dial the last dialed number.
z End a call:
{ During talking, press the PAIRING button of BluePin
TM
to end this call.
{ Or press the END CALL button of i399/i398 or remote control to end this call.
{ Also you can press the END button of cell phone to end the call.
z Reject a call:
{ If there is an incoming call, press and hold the PAIRING button of BluePin
TM
for 3 seconds to reject the call.
{ Or press the END CALL button of i399/i398 or press the END CALL button on remote control to reject the call.
{ Also you can press the END button of cell phone to reject the call.
Note: To operate the speakerphone call, BluePin
TM
must be connected with a cell phone with Bluetooth technology first.
When iPod works in iPod, FM or AUX IN mode, if there is an incoming call, or you make a call, i399/i398 will change to BluePin
TM
mode automatically. After ending the call, i399/i398 will resume the previous worked mode.
OPERATIONAL INSTRUCTIONS