EN - 2
2. Make sure the hydrant is closed
3. Call a qualified technician if this is not
the case.
If an error occurs that you cannot fix, the
warning shown below will be displayed. Call
a qualified technician if this is the case.
Call Service
You can find more information in the
“FAILURE CODES AND WHAT TO DO”
section in your user guide.
Selecting Eco/Normal Mode
1
76
543
8
2
1. Press the Power On/Off button to
switch the machine on.
NOTE: The factory default setting for
Eco mode is ON.
2. Simultaneously press the Option (3) and
Delay (4) buttons for 3 seconds to open
the Settings menu.
3. Select the “5. Eco mode” sub-menu.
4. If “Eco mode:NO” is selected using the
Up and Down Selection buttons (6, 7)
and confirmed using the Confirmation
button (2), Normal mode is activated.
The inner light will remain illuminated
for as long as the machine is on and the
door open.
5. If “Eco mode:YES” is selected using the
Up and Down Selection buttons (6, 7)
and confirmed using the Confirmation
button (2), Eco mode is activated. The
inner light will remain illuminated for 4
minutes after the door is opened and if
no intervention occurs. The inner light
will then switch off.
NOTE: This option can be activated/
deactivated when the door is either open or
closed.
To Next Page
Loading...
