38
Procedure:
SR - R - P
Procedure:
DCC
• Remove the grill and the burners from the hob.• Bruciatori SR – R – P :
SR – R – P burners: unscrew injectors “U” using a 7-mm spanner (g. 1) and replace
them with those for the newgas according to table number 2 on page 20.
• DCC – Dual burners: unscrew the 2 screws “P” and remove cover “C” g.2.
• Unscrew injectors “U” using a 7 mmspanner (g.3) and replace them with those for
the new gas according to table number 1 below 13.
ADJUSTMENT
- Replacement of the injectors for models
2 3
To Next Page
Loading...
