40
Adjustments
- Burners on the hob
When installing the cooker, you must check that the minimum gas ow of the burners on
the hob and in the oven is correctly regulated.
If the type of gas is changed it is imperative to adjust the minimum ow. The regulating
procedure is as follows.
1. Light one burner at a time and turn the ame up to maximum.
2. Remove the knob of the corresponding gas tap and insert a screw driver in the end part
of the tap or in the screw (g. A2).
3. Turn the tap to minimum position.
4. Unscrew, turning to the left, to increase the ame, or screw to the right to decrease it.
5. If a liquid gas is used (Butane - Propane), the regulating screw must be fully screwed in.
ADJUSTMENTS
- Adjustments minimun GAS ow
To Next Page
Loading...
