IMADA CO.,LTD..
Standard Model Digital Force gauge ZTS series
6 / 8
2015/07/28
High functionality model. It
has more useful functions than
ZTS series.
Prints indicated values and
data in internal memory. *CB-
308 cable is necessary.
You can grip handles firmly so
that it becomes easier to
apply high load force steadily.
Sensor-separate force gauge ZTS/ZTA series
External sensor (load cell), separated from the amplifier
- Broad line-up of sensors enables installing into facilities and suitable
measuring under special environments.
- High accuracy and repeatability･
eZ-Connect series Sensor-interchangeable Amplifier eZT
eZT is an amplifier which enables to connect to various eZ-Connect load cells of
your choice.
- Useful for different types of measurement; small and large force values, or
compression and torque.
*The amplifier and the load cell are not calibrated (actual loading calibration) together
therefore the inspection certificate is not included. Please calibrate them or ask us for
calibration service.
*The accuracy of load cell is dependent on the model. Please refer to each specification sheet
for details.
[Related Cable]
To connect to a multi meter, oscilloscope.
Analog cable (For -AN option)
To connect to a multi meter, oscilloscope.
To connect to a PC having its own system
To connect to a printer DP-1VR
To connect to a test stand to enable force control or overload
prevention functions.
To connect to a test stand to enable force control or overload
prevention functions.
Open end connection cable
Output cable for loose wire 37 pin
(Useful for connection with unique equipment.)
To Next Page
Loading...
Need help?
General
