Imada ZTS Series - Understanding the ZTS Gauge Interface; Multi Display Layout and Navigation; Single Display and Keypad Controls

IMADA CO.,LTD..
Standard Model Digital Force gauge ZTS series
5 / 8
2015/07/28
Attachment
Accessory attachment
>> Please refer to ZT series Range
above.
*The set of attachments varies
according to range.
*For more information,
please refer to Standard attachment
specifications.
Accessory attachments’ shape. (an excerpt)
S-1
Small
hook
S-2
Disk
shaped
S-3
Conical
shaped
S-6
Extension
rod
S-7
Large
hook
[Option]
Option
Details
Model
Analog voltage
(Sensor raw data)
To output sensor data as fast analog voltage without conversion.
*The speed is higher than D/A (standard), but there are demerits at the same time
that zero reset is not possible, and there are may be signal noise.
*CB-118 cable is necessary.
-AN
* With CB-108, you can output analog voltage from standard ZTS series.
[Application of Force Gauge]
ZT series enable…
1. Controlling external equipment according to load value. (e.g. To stop or change operation of machine at a
selected load value.)
2. Adding a certain load value. (e.g. To maintain sample pressed at a chosen load value.)
3. Producing inspection device synchronized with work process. (e.g. To improving efficiency of inspection
process.)
4. Finding inferior goods earlier with OK/NG judgment function.(e.g. To do quality control thoroughly)
>> Please contact us or our distributor in your country for further information.
[Related products]
Graphing Software: Force Recorder
※This image is from Standard ver.
Main functions
- You can make graphs at real time via USB connection
at 2000Hz.
- 5 graphs at maximum can be overlaid. (Available in
Standard model only)
- You can write memo on each graph. You may write
down testing conditions such as testing speed.
* 2 models available to suit your needs: Light, and Standard
* Please refer to each specification for further information