Image Access WideTEK 36 Setup Instructions

Perform Setup
68
Test the Power Button Functionality
 To check whether pressing the power button is recognized by the
system, press and hold the power button for one or two seconds.
The field "Start Button" (3) is shown in red. Pressing the power button is
detected by the system.
 To return to the previous submenu, tap BACK (1).
 To return to the "Start screen", tap EXIT (2).

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English