EasyManua.ls Logo

Image Access widetek 44 - User Manual

Default Icon
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WideTEK® 36/44/48
Setup Instructions
English
01/2017

Questions and Answers

  • D
    Dylan PriceJul 25, 2025
    How to fix a darker than expected image on my Image Access Scanner?
    • T
      Todd NavarroJul 26, 2025
      If your Image Access Scanner produces images that are darker than you expect, it might be because the white balance target is much brighter than the actual scanning target. To fix this, navigate to the Adjustments function and adjust the Brightness Correction setting.
  • G
    Gabrielle LivingstonJul 30, 2025
    Why is my Image Access Scanner producing images that are too bright?
    • D
      Drew WelchJul 30, 2025
      If the images from your Image Access Scanner appear brighter than expected, this could be due to the document being much brighter than the target used for white balance. You can correct this by going to the Adjustments function and modifying the Brightness Correction setting.
  • D
    deborah16Aug 5, 2025
    What to do if my Image Access Scanner shows a color shift towards red?
    • M
      Michael GrayAug 5, 2025
      If your Image Access Scanner's images show a red tint, and the target used for white balance is more blue than the scanning target, go to the RGB adjustments and lower the gain on red.
  • H
    Heather BrownAug 9, 2025
    Why does my Image Access Scanner show a color shift towards red (tint)?
    • W
      walkerheidiAug 9, 2025
      If your Image Access Scanner's images show a red tint, it might be because the scanner is receiving significant amounts of infrared light (like sunlight or spotlights) that aren't visible to the eye. Try changing the scanner's position, closing the blinds, or dimming or shutting off any bright spotlights.
  • S
    Stacey SmithAug 14, 2025
    What causes a blue tint in images from my Image Access Scanner?
    • L
      larsenanthonyAug 14, 2025
      If your Image Access Scanner's images display a blue tint, it's likely because the target used for white balance is more red than the scanning target. To resolve this, go to the RGB adjustments and decrease the gain on blue.
  • K
    Kendra YatesAug 19, 2025
    How to fix vertical stripes or streaks on my Image Access Scanner?
    • M
      Melissa FlynnAug 19, 2025
      If images from your Image Access Scanner have vertical stripes or streaks, this could be due to an improper white balance. Perform the White Balance procedure to correct this issue.

Image Access widetek 44 Specifications

General IconGeneral
Scanning TechnologyContact Image Sensor (CIS)
Optical Resolution600 dpi
TechnologyCIS
Max. Scan Width44 inches
Color Depth48 bit
Maximum Document Size44 x unlimited length
InterfaceGigabit Ethernet

Related product manuals