Image Access widetek 44 User Manual

/ /
Manual Page 71
C.4.4 Auto Density
The Auto Density controller is used to set the scanner’s sensitivity for the automatic
format detection.
Default value: 60
Picture 63: Auto Density controller
When scanning dark documents, the value should be reduced in small steps until the
desired result is achieved.
In general: The higher the numeric value, the more contrast must be between
background and scanned document.
The default value is marked in green below the scale.

Image Access widetek 44 Specifications

General

Brand	Image Access
Model	widetek 44
Category	Scanner
Language	English