Why is my Image Access Scanner image darker than expected?
If the image from your Image Access Scanner is darker than expected, it might be because the target used for white balance is much brighter than the scanning target. To resolve this, go to the Adjustments function and modify the Brightness Correction setting.
Why is my Image Access WideTEK 36 Scanner image brighter than expected?
If the image from your Image Access Scanner is brighter than expected, it could be due to the document being much brighter than the target used for white balance. To fix this, go to the Adjustments function and modify the Brightness Correction setting.
What to do if my Image Access WideTEK 36 Scanner image has vertical stripes or streaks?
If your Image Access Scanner image has vertical stripes or streaks, it may be due to an improper white balance. To correct this, perform the White Balance procedure.
What to do if my Image Access Scanner image shows a color shift towards red (tint)?
If the image from your Image Access Scanner shows a color shift towards red, the target used for white balance might be more blue than the scanning target. Correct this by going to the RGB adjustments and lowering the gain on red.
What to do if my Image Access WideTEK 36 image shows a color shift towards blue (tint)?
If the image from your Image Access Scanner shows a color shift towards blue, it could be because the target used for white balance is more red than the scanning target. You can fix this by going to the RGB adjustments and lowering the gain on blue.
What to do if touching the STOP button on the Image Access WideTEK 36 Scanner touch screen does not power down the device?
If touching the STOP button on the touch screen of your Image Access Scanner doesn't power down the device, it may be due to internal software or application hangs. First, end all applications and try again. If the problem persists, touch the STOP button for at least 10 seconds, then power up the scanner again.
What to do if touching the Image Access WideTEK 36 touch screen does not power up the device?
If touching the touch screen on your Image Access Scanner does not power up the device, it could be due to a connector failure or software glitch. Try switching the power off for at least 10 seconds and then retry after the touch screen is illuminated again.
How to troubleshoot Image Access WideTEK 36 when the touch screen does not show the stand-by message?
If the touch screen of your Image Access Scanner does not show the stand-by message, the cause may be no power. Check the main outlet, power cord, and the power-on switch on the left side of the device.
How to fix a darker than expected image on my Image Access Scanner?
If your Image Access Scanner produces images that are darker than you expect, it might be because the white balance target is much brighter than the actual scanning target. To fix this, navigate to the Adjustments function and adjust the Brightness Correction setting.
Why is my Image Access Scanner producing images that are too bright?
If the images from your Image Access Scanner appear brighter than expected, this could be due to the document being much brighter than the target used for white balance. You can correct this by going to the Adjustments function and modifying the Brightness Correction setting.
Describes the content and purpose of the operation and setup manuals.
Covers safety warnings, markings, compliance standards, and general manual information.
Essential precautions for safe operation and to prevent device damage.
Guidance on connecting the scanner to the power source.
Guidance on selecting an appropriate operational location for the scanner.
Information on scanner upkeep and user-unserviceable repair procedures.
Accessing the scanner's web-based user interface and its start screen.
Explains the three-part layout of the main interface screen.
Details on paper feed delay, transport speed, document output, and scan modes.
Configuring color modes, file formats, resolution, and stitching.
Table mapping problems, causes, and recommended actions for troubleshooting.
Lists scanner error messages, their application equivalents, and problem descriptions.
Provides details on optical system, resolution, and illumination.
Specifies operating temperature, humidity, noise level, voltage, and frequency.
Details physical size, weight, and CE/FCC declarations of conformity.
General| Brand | Image Access |
|---|---|
| Model | WideTEK 36 |
| Category | Scanner |
| Language | English |
To Next Page
