Image Access WideTEK 36 User Manual

Manual Page 87
B.3.5 Output Option Copy
This output option prints directly to a previously installed network printer. The Option key
is used to configure the remotely connected printer.
Picture 95: Output Option Copy
Click at the link Options to set the connection to the printer and to define specific
parameters.
B.3.5.1 Remote Printer
Parameter Description
Printer Preset
Choose a printer configuration out of five possible set of
parameters. If you click on Change Name you
can change
the name of this set.
Connection Type
Choose between IP Networking and SMB Printer Queue.
Address
(with IP Networking only)
Enter the IP address of the printer.
Port (9100)
(with IP Networking only)
Enter the IP port of the remote printer. Default is port 9100.
Connection Timeout
(with IP Networking only)
Choose the timeout for connecting to the remote printer
before the connection is aborted.
Port (139)
(with SMB Printer Queue only)
Enter the IP port of the remote printer. Default is port 139.
Note: Each change of an entry field is transferred to the scanner immediately.

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English