Manual Page 27
A.12.4 Scanning documents on normal or heavier paper
For best results, when scanning documents on normal or heavier paper, the paper
transport wings must be inserted at the backside of the paper guide plate.
Insert every paper transport wing with the long end forward into the notch at the back of
the guide plate.
Picture 14: Inserting at the back
Picture 15 shows the position left from the middle of the document input.
Picture 15: Position for normal and high paper weights
After inserting both paper transport wings, close the upper unit.
Note: Remove the paper transport wings before scanning any stiff documents such as
cardboard.
To Next Page
Loading...
