DA-6804+D Series
Installation and Operation Manual
vii
Copyright © 2011, Harris Corporation
3 Contact your dealer if any item on the packing list is missing.
4 Co
ntact the carrier if any item is damaged.
5 Remo
ve all packaging material from the product and its associated
components before you install the unit.
Product Servicing
DA-6804+ series modules are not designed for field servicing. All hardware and
firmware upgrades, modifications, or repairs require you to return the modules to
the Customer Service center.
Returning a
Product
In the unlikely event that your product fails to operate properly, please contact
Customer Service to obtain a Return Authorization (RA) number, and then send
the unit back for servicing.
Keep at least one set of original packaging, in the
event that you need to return a
product for servicing. If the original packaging is not available, you can purchase
replacement packaging at a modest cost or supply your own packaging as long as
it meets the following criteria:
Withstands the weight of the product
Holds the product rigid within the packaging
Leaves at least two inches of space between the product and the container
Protects the corners of the product
Ship products back to us for servicing prepaid and, if possible, in the original
pa
ckaging material. If the product is still within the warranty period, we will return
the product prepaid after servicing.
Safety Standards and Compliances
You can find the 6800+ Safety Instructions and Standards Manual on the Harris
Infrastructure and Networking Documentation and Product Resources DVD, or
download it from our website.
To Next Page
Loading...
