Need help?Do you have a question about the Imagine DA-DHR6804+D and is the answer not in the manual?
Lists the key features of the DA-6804+D series distribution amplifiers, including channel configurations and operational modes.
Illustrates and describes the front panel of the DA-6804+D module, highlighting its components.
Illustrates and describes the back panel of the DA-6804+D module, showing connectors and layout.
Diagrams illustrating the signal path for DA-DH6804+D and DA-DHR6804+D models.
Details the maximum allowable power ratings for various 6800+ frame types used with the modules.
Configures reclocker modes for channel 1 and channel 2 using jumpers J1 and J2.
Sets the control modes for all DA-6804+D modules using Jumper J3.
Provides step-by-step instructions for correctly installing and removing DA-6804+D series modules.
Describes the automatic switching between input signals based on availability and hysteresis.
Explains the reclocking capabilities for different signal types and models.
Details the front module's status and signal condition LEDs for monitoring.
Guides users on controlling the module via a web browser interface over an Ethernet connection.
Explains how to control the module remotely using the CCS Navigator software application.
Provides important considerations for setting control parameters and saving changes.
Lists detailed electrical specifications for the input channels, including signal type, impedance, and equalization.
Lists detailed electrical specifications for the output channels, including amplitude, rise/fall time, and jitter.
Details the performance and operating temperature ranges for the modules.
Specifies the power usage of the modules in normal and sleeping (green) modes.
Indicates the time required for the module to become fully operational after powering up.
To Next Page
General