TR 225
14
IMER INTERNATIONAL S.p.A.
Fig.16
FORMAZIOME DI ANSE
FORMATION DE BOUCLES
LOOPS
VERSCHLEIß=MATERIALVERLUST UNREGELMÄSSIGE OBERFLÄCHE
FORMACION DE CURVAS
ROTTURA DI SINGOLI FILI
RUPTURE DE FILS
BREAKING OF SINGLE WIRES
FEHLEN EINER LITZE
ROTURA DE HILOS
ROTTURA DI UN TREFOLO
RUPTURE D' UN BRIN
BREAKING OF ONE STRAND
BRECHEN EINZELNER DRÄHTE
ROTURA DE UN RAMAL
CORROSIONE INTERNA O ESTERNA
CORROSION INTERIEURE OU EXTERIEURE
INTERNAL OR EXTERNAL CORROSION
ABFLACHUNGEN ODER AUFWÖLBUNGEN
CORROSION INTERNA O EXTERNA
PUNTI DI VISIBILE APPIATTIMENTO
POINTS D' APLATISSAGE VISIBLE
VISIBLE FLATTENED POINTS
SCHLAUFENDIBILDUNG
PUNTOS DE ACHATAMIENTO EVIDENTE
RICAMBI:
Per tutti gli ordini dei pezzi di ricambio vogliate indicare: 1 - Tipo di macchina. 2 - Numero di codice e di riferimento
collocato in corrispondenza di ogni definizione. 3 - Numero di serie e anno di costruzione riportato sulla targhetta della macchina. SIMBOLOGIA:
Intercambiabilità (esempio): Fino alla macchina matricola N° 5240 è stato installato il rif.1 cod.3204530,dalla mcchina matricola N° 5241 è stato
installato il rif.1.1 cod.3204520. Il rif.1.1 è intercambiabile (
) con il rif.1. Non sono intercambiabili i rif.1 e rif.1.1 se in tabella è presente il
simbolo (
).
SPARE PARTS:
All orders for spare parts must indicate the following: 1 - Type of machine.2 - Part number and position number of
each part.3 - Serial number and year of manufacture reported on the machine's identification plate.
SYMBOL: Interchangeability (example):Pos..1 P.n. 3204530 was installed on machincs up to N° 5240 and Pos.1.1 P.n. 3204520 installed on
machine N° 5241 onwards. Pos. 1.1 is interchangeable (
) with Pos. 1.Pos. 1 and Pos. 1.1 are not interchangeable if the (
) symbol
appears in the table.
Rif.
Cod.
I F GB D E
Note
1 3204530
Riduttore Réducteur Reducer Untersetzungsgetriebe Reductor 5240
2 3204520
Riduttore Réducteur Reducer Untersetzungsgetriebe Reductor 5241
Table 1 - Size of cable for supply lead
Length of cable
in Metres
0 to 12 13 to 20
21 - 32
33 to 50
Cable - 3 core
section in mm²
2,5
4 6
10