22
Draught check
These accessories can be purchased from your
retailer.
Electrical installation
If the machine is delivered from the factory with a
plug attached it can be connected to an earthed
wall socket. Otherwise, a permanent connection
using a multipolar circuit breaker must be made
by a qualied professional.
Connection on delivery
• 230V, 1-Phase, 16A
• 50Hz
• Heat output 3000W
• Use a type A residual-current device.
Switch-over
The switchover must be performed by a qualied
electrician.
See the section Settings.
Installation
To Next Page
Loading...
