Moisture Pro
Model：MP100
Introduction
MP100 moisture meter measures the moisture content by detecting the electrical resistivity
of the target material using two pins. The unit has adopted low consumption single chip smart
design, the moisture content is displayed by LCD. The MP100 has the advantages of portable
size, easy to operate and rapid measuring.
Safety Instructions
Failure to follow the instructions listed below may cause personal injury.
● Please read this manual thoroughly before operaon.
● Please do not remove any labels from the unit.
● Do not operate the tool within the presence of flammable/explosive gases. .
● Do not allow children to operate the unit.
● Put on pin cover while not in use to avoid pins damage.
● The pins are very sharp, be sure to put on the protector after use.
Battery Safety Instructions
●Please remove the baery when cleaning the product.
● Remove the baery when not in use for an extended period of me.
● Please install the batteries properly as the instructions of the positive and negative charges
● Please dispose of the batteries properly. High temperature will cause explosions, do not
burn the batteries. Strap insulated tape around the battery charges to avoid unsafe contacts
with other objects. Please follow the local regulations of battery disposing.
To Next Page
Loading...
Need help?
General
