_____________________________________________________________________________________
STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY www.imi-critical.com
Manual 5021, rev. 00 10/2015 – SC/VHS - 10 -
5.6.4 Electrical Connections (If any)
Warning
Before carrying out electrical connections, switch off any power and control lines.
Use components appropriate as for type, material and dimensions.
The connections should be made by qualified staff.
- Introduce connection cables.
- Make the connections in compliance with applicable wiring diagrams on the documentation supplied.
- Screw the cable gland.
- Replace the plastic plugs of unused entries with metal plugs.
5.6.5 Earting connection
If the hearting connection is not guaranteed trough mechanical parts where actuator is mounted, it is
necessary ensure a directly hearting connection on provided point of actuator.
To Next Page
Loading...
