Why is my IMI SC Controller actuator too slow?
If the IMI Controller actuator is too slow, first, check if the supply pressure is low and adjust it accordingly. Also, verify the speed controls and adjust them to increase the flow settings. If the issue persists, the main valve may be worn, so consult the valve manufacturer's documentation.
How to fix an IMI SC Controller actuator that doesn’t work?
If your IMI Controller actuator isn't working, the issue might be a lack of hydraulic supply. Check the supply line to ensure it's properly connected. It could also be a defective main valve, in which case you should consult the valve manufacturer's documentation. If those aren't the problem, the control might have failed, and you should contact STI s.r.l. - Customer Care Dept.
What to do if there are leakages on the hydraulic cylinder of IMI SC Controller?
If you notice leakages on the hydraulic cylinder of your IMI Controller, it is likely due to damaged seals. The solution is to replace the cylinder seals.
How to correct the incorrect position of the valve in IMI SC?
If the IMI Controller valve is not in the correct position, re-adjust the mechanical stops. Also, re-adjust the electric limit switches indication.
General| Brand | IMI |
|---|---|
| Model | SC Series |
| Category | Controller |
| Language | English |
Important safety instructions and manual applicability for safe operation.
Manufacturing quality, ISO 9001 compliance, and manufacturer details.
Covers warranty period, terms, conditions, and manufacturer's liability.
Lists relevant European directives and standards for product compliance.
Explains warning and obligation symbols used in the manual for safe operation.
Overview of SC/VHS actuators, their function, and main components.
Lists and illustrates the primary components of the SC/VHS actuator.
Explains the coding system for SC/VHS actuators, detailing parameters like version, diameter, and stroke.
Provides key technical specifications of the SC/VHS actuator.
Details the information found on the actuator's identification plate.
Guidelines for safe lifting, handling, and transport of the actuator.
Procedures for checking the actuator upon receipt and recommendations for proper storage.
Information on ensuring stability during operation, assembly, and dismantling.
Mentions the availability of interface documents and dimensional drawings.
Detailed instructions and safety precautions for installing the actuator, including pre-checks and assembly.
Instructions for making correct and safe hydraulic connections.
Safety warnings and procedures for electrical and earthing connections.
Procedures and safety warnings for disassembling the actuator.
Explains how the SC/VHS actuator operates and its intended applications.
Defines the specific applications and limitations for the SC/VHS actuator.
Lists foreseeable misuse and specifies the operational boundaries of the actuator.
Highlights potential hazards and risks associated with the actuator's operation.
Step-by-step guide for the initial startup and testing of the actuator.
Detailed instructions on how to adjust the actuator's stroke for proper valve operation.
Recommended schedule and checks for routine maintenance and inspections.
Procedures for maintenance tasks requiring disassembly or replacement of parts.
Specific steps for replacing seals in the hydraulic cylinder.
Instructions for repairs and reassembling the actuator, covering hydraulic cylinder and overall unit assembly.
Information on recommended lubricants and hydraulic fluids for the actuators.
A guide to diagnose and resolve common issues with the actuator.
Detailed list of parts for the valve adaptation assembly with quantities and materials.
Detailed list of parts for the single acting hydraulic cylinder.
Detailed list of parts for the stop protection assembly.
Information on ordering spare part kits for the SC/VHS series.
Guidelines for safe decommissioning, disposal, and recycling of actuator components.
Warnings against reusing parts and the importance of checking local disposal regulations.
Manufacturer's declaration of incorporation for the partly completed machinery.
To Next Page
