Need help?Do you have a question about the Immergas CARV2 and is the answer not in the manual?
General| Brand | Immergas |
|---|---|
| Model | CARV2 |
| Category | Temperature Controller |
| Language | English |
Introduction to the Immergas CAR V2 modulating remote control, highlighting its design and ease of use.
Essential guidelines for safe and proper use of the CAR V2 remote control, including warnings and manufacturer liability.
Guidance on professional installation of the CAR V2 remote control and its connection to the boiler by specialized staff.
Step-by-step instructions for physically mounting the CAR V2 remote control on the wall or recess box.
Procedure to set the current day and time on the CAR V2 remote control using the main selector and buttons.
Guide to selecting the operating mode (Stand-by, Summer, Winter, Cooling) via the main selector.
Instructions for adjusting the Domestic Hot Water (DHW) temperature using the selector dial.
Details on regulating DHW temperature levels using the 'HW PRG' function for storage tank units.
How to set and operate the CAR V2 in manual mode for room central heating, including temperature adjustment.
Explanation of automatic functioning for room temperature management based on hourly programming.
Description of forced automatic functioning, activated by temporary manual adjustments to the room temperature.
How to set and operate the CAR V2 in manual cooling mode, including temperature adjustment.
Explanation of automatic functioning for room temperature management in cooling mode via hourly programming.
Description of forced automatic functioning in cooling mode, activated by temporary manual adjustments.
Procedure to set distinct comfort and economy room temperatures for heating and cooling modes.
Explanation of how the CAR V2 detects and displays boiler and remote control malfunctions and error codes.
Procedure for resetting specific boiler errors using the dedicated button, including attempt limits.
How to perform a general hardware reset or restore the CAR V2 remote control to factory settings.
How to select the operating language for the CAR V2 remote control from available options like Italian and English.
Details on managing regulation parameters like minimum flow temperature and offset with external probe.
How to activate/deactivate the room probe and configure its reading correction and modulating function.
Setting the REDUCT parameter to manage flow temperature during economy periods, either by switching off or reducing.
To Next Page
