Immergas CARV2 - Programming Functioning Time

23
9.2 Programming functioning time.
By pressing the button, it is possible to enter the
time periods programming window for programming the
room temperatures and DHW timer (as well as setting the
current time and day).
By pressing the + / - buttons, the items that can be set in the
menu are displayed alternately.
ere are, in fact, three types of program:
- CH PRG: room central heating program
- HW PRG: DHW heating program
e period in which the DHW temperature is in comfort
will be distinguished by the switch-on of the icon.
N.B.: the function must only be activated in the presence
of a cylinder. e DHW is always active as per standard.
- CHIPRG: room cooling program
By following the points described below, it is possible to
create or modify the time program selected.
1) Press the button, select the program to modify
by pressing the + / - buttons, aer which conrm by pressing
the button.
2) Select the day of group of days by pressing the + / - buttons
and conrm the selection by pressing the button:
- Monday, Tuesday, Wednesday... Sunday (individual day)
- Mon - Fri (from Monday to Friday)
- Sat - Sun (from Saturday to Sunday)
- Mon - Sat (from Monday to Saturday)
- Mon - Sun (from Monday to Sunday)
3) Set the functioning times with comfort and economy
temperature. Within the 24 hours it is possible to dene
a maximum of 4 time periods with Comfort temperature,
each of which is characterised by a switch-on time and a
switch-o time.
e minimum variation of the switch-on and switch-o
time is 30 minutes.
Set the rst functioning period with comfort temperature
(ON 1) indicated at the top and the switch-on time at the
bottom. Press the + / - buttons to modify the switch-on time
and press the button to memorise. At this point, pass
to the next functioning period with comfort temperature
(OFF) indicated at the top and the switch-o time at the
bottom. Press the + / - buttons to modify the switch-o
time and press the button to memorise. When the