24
rst phase has been designed, pass automatically to the next
functioning phases at comfort and economy temperature in
order to program. is means repeating the points described
previously up to phase 4.
e sequences of the On and O states must always be
sequential. For example, it is not possible to set “OFF 2” at
13.30 and “ON 3” at 11.00.
Once the day or group of days have been programmed,
proceed in the same way for the remaining days and the
remaining programs.
N.B.: if only 3 switch-on times are used, set the fourth with
switch-on/o time at 24.
N.B. in automatic functioning conditions ( ) the
display will show the 24 hour bar indicating the dierent
time phases with Comfort or Economy temperature
. The presence of the
hyphen on the time bar corresponds to functioning in
Comfort mode.
To Next Page
Loading...
Need help?
General