Immergas VICTRIX SUPERIOR 26 - Page 84

84
INSTALLER
USERMAINTENANCE TECHNICIAN
TECHNICAL DATA
Victrix Superior 26
Gas type CO
2
to nominal Q. CO
2
to ignition Q. CO
2
to minimum Q.
G20 8.8% (± 0,5) 8.8% (± 0,5) 8.8% (± 0,5)
G31 10% (± 0,5) 9.5% (± 0,5) 9.5% (± 0,5)
Gas type O
2
at Nominal Q. O
2
at Ignition Q. O
2
at Minimum Q.
G20 5,2% ± 0,5 5,2% ± 0,5 5,2% ± 0,5
Victrix Superior 35
Gas type CO
2
to nominal Q. CO
2
to ignition Q. CO
2
to minimum Q.
G20 8.8% (± 0,5) 8.8% (± 0,5) 8.8% (± 0,5)
G31 10% (± 0,5) 9.5% (± 0,5) 9.5% (± 0,5)
Gas type O
2
at Nominal Q. O
2
at Ignition Q. O
2
at Minimum Q.
G20 5,2% ± 0,5 5,2% ± 0,5 5,2% ± 0,5
If a Hydrogen Ready installation is implemented, refer to the table above for all calibration operations, with the O2% content in
the ue gas.
In addition to yearly maintenance, one must also check the energy eciency of the thermal system, with frequency and proce-
dures that comply with the indications of the technical regulations in force.