IMOU A1 - Camera Hardware Details; Ports and Buttons; LED Indicator Guide; Understanding LED Status

Note: Press and hold the reset button for 10 s to reset the camera.
The pattern of the LED indicator is included in the following table.
LED Status
Green light on
Green and red light
ashing alternately
Powered o/LED turned o
Rebooting after reset
Booting
Device malfunction
Waiting for network
O
Red light on
Firmware updating
Device Status
Green light ashing
Network connection failed
Red light ashing
Operating properly
Built-in Speaker
Micro SD
Card Slot
Power Port
Ethernet Port
Reset/Pair
Button