IMOU Ranger Pro - Page 4

Built-in Speaker
Micro SD Card Slot
Power Port
Ethernet Port
Reset/Pair Button
Note:
Press and hold the reset/pair button for 10 seconds to reset the camera.
The pattern of the LED indicator is included in the following table.
LED Status
Off
Booting
Device malfunction
Red light on
Green and red light
flashing alternately
Press the reset/pair button to enter pairing mode.
Device Status
Waiting for network
Green light on Operating properly
Green light flashing
Red light flashing Network connection failed
Firmware updating
Powered off/LED turned off
Rebooting after reset