Need help?Do you have a question about the IMP PUMPS NMT Max C and is the answer not in the manual?
General| Brand | IMP PUMPS |
|---|---|
| Model | NMT Max C |
| Category | Water Pump |
| Language | English |
Lists abbreviations and their definitions used in the manual for clarity.
Illustrates various possible connection configurations for the NMTC module.
Provides an overview of NMTC module specifications like ambient humidity and dimensions.
Details important considerations for connecting cables to the module terminals.
Step-by-step guide for physically installing the NMTC module onto the pump.
Instructions on how to connect the wiring to the NMTC module.
Provides visual examples of different connection configurations for the module.
Explains the priority order of different control signals influencing pump operation.
Defines symbols and corresponding regulation modes and module set point controls.
Describes the rotary switch for selecting module operation modes and their functions.
Details the functionality and connection configurations for Mode 1.
Details the functionality and connection configurations for Mode 2.
Illustrates different Ethernet connection topologies for the module.
Explains how to establish a direct computer-to-pump Ethernet connection.
Details how to connect the pump to the network using a router.
Outlines how to configure the pump using its web interface over Ethernet.
Describes the interface designations and their functions for Modbus communication.
Explains the Modbus RTU network topology and connection methods.
Provides guidance on connecting the module to a Modbus network.
Details settings for Modbus communication speed, parity, and device address.
Explains the requirement for RS-485 wiring termination.
Provides an overview of the different Modbus register blocks and their purpose.
Details the Modbus registers used for configuring the NMTC module.
Lists Modbus registers used for monitoring the NMTC module's status.
Describes Modbus registers for controlling pump operations and settings.
Details Modbus registers for reading the pump's operational status.
Lists Modbus registers for accessing various pump performance data.
Lists error codes, their descriptions, and probable causes for troubleshooting.
To Next Page
