─ 13 ─
Assembly
STEP 1
Attach the Rear Base ASSY (#2) and the Shaped Base ASSY (#3) to the Main Frame
ASSY (#1) using:
two Button Head Cap Screw M12*75 (#11)
four Flat Washer Φ13*Φ26*2 (#15)
two Nylon Lock Nut M12 (#18)
two Button Head Cap Screw M10*25 (#13)
four Flat Washer Φ11*Φ23*2 (#16)
two Nylon Lock Nut M10 (#19)
Note: Wrench tighten bolts and nylon lock nuts.
To Next Page
Loading...
