Assembly
20
STEP 4
1. Attach the FOAM ASSY (#19) and the Outside Handle Frame ASSY (#15) to the Foam
Frame ASSY (#13) using:
two Φ90*Φ51.5*6 Plastic Ring (#11)
two Φ8 Spring Washer (#36)
two M8*30 SHCS (#34)
one Φ60*11.6Aluminum Cap (#20)
one M10*50 FHCS (#32)
2. Attach the Seat Pad (#18) to the Adjustable Seat Pad Frame (#7) using:
two M10*30 SHCS (#31)
two Φ11*Φ20*2Flat Washer (#38)
3. Attach the Back Pad (#17) to the Back Pad Frame ASSY (#3) using:
two M10*80 SHCS (#30)
two Φ11*Φ20*2Flat Washer (#38)
Note: Wrench Tighten Bolts and Nylon Lock Nuts.
To Next Page
Loading...
