ImpulseRadar CrossOver - Appendix A, Specifications

ImpulseRadar
CrossOver® User Manual V1.4
Page 22 (31)
Appendix A, Specifications
ImpulseRadar products are under continuous development and we reserve the right to change
specifications at any time and without prior notice. You may verify product specifications at any time
by contacting our headquarters at: support@impulseradar.se
CrossOver® CO730
ANTENNA
Technology
ImpulseRadar real-time sampling
Antenna type
CrossOver® dual-channel
Centre frequency
CH-1: 70 MHz / CH-2: 300 MHz
Signal to noise ratio (SNR)
>100 dB
Significant/useful number of bits
>16 bit
Scans/second
>800
Survey speed
> 130 km/h @ 5 cm point interval
Time window
1200 ns, standard
Bandwidth
>120%, fractional, -10 dB
Acquisition mode
Wheel, time or manual
Positioning
Wheel encoder, internal DGPS, external GPS (NMEA 0183
protocol)
Power supply
12 V Li-Ion rechargeable battery, or ext. 12 V DC source
Power consumption
1.3 A
Operating time
7 hours
Dimensions
972 x 762 x 270 mm
Weight
19 kg (including battery)
Operating temperature
-20° to +50°C
Environmental
IP65
Regulatory certification
Pending (FCC & CE)
USER INTERFACE
Display
720 x 1280 pixel or better
Operating system
Android™ (>ver. 5 Lollipop) or later
Memory
2.7 GB SDRAM or better
Processor
Intel Atom x5-Z8550, Quad-core 2.3 GHz Krait 400 or better
Recommendation
Panasonic Toughpad FZ-A2 (or equivalent)