Set Top Box USER MANUAL
2
Operating Instructions
OPERATION MODE : When the Power button of the remote control unit is pressed, the LED will turn
to Green showing that the Set Top Box is in OPERATION Mode. In this mode the Set Top Box can be
used for viewing programs through the TV Set.
STANDBY MODE : While in OPERATION mode, pressing the power button of the remote unit, the
LED will turn Red and the Set Top Box will enter in STANDBY Mode.
When you do not wish to watch the program, keep the Set Top Box in STANDBY mode using
the remote control unit. DO NOT DISCONNECT the 230 volts power supply adaptor (even
during the night).
The Set Top Box should always be connected to the cable network.
If the Set Top Box is not connected to the RF input cable or if the power supply adaptor is
disconnected, the Set Top Box may not receive important message updates and information
(required for the effective functioning of the Set Top Box) transmitted from your cable operator.
The INDIGITAL Set Top Box is meant for viewing only the Digital channels and not the Analog
Channels. Please keep the Set Top Box in standby mode to view Analog channels (If analog
Transmission available in the network) through your Set Top Box. If the power supply adaptor of
the Set Top Box is not connected, you can’t view the analog channels any more.
If the power supply adaptor of the Set Top Box has not been connected for a long period of time
or the RF input cable has been disconnected for a long period of time, the Set Top Box may not
function properly when it is connected again due to authorization/initialization error. In such case
please contact your cable operator or the Customer Care Service for assistance.
Technical Specifications
Technical Specifications
Tuner
Input Frequency : 47 ~ 862 MHz
Input level range : 47 ~ 64 dBuV
Input Impedance : 75 ohm
Video
CODEC : MPEG-2 MP@ML
Output system : PAL
Audio
CODEC : MPEC-1 Layer 1&2
Frequency response : 20Hz ~ 20KHz
Output level : Adjustable
Adapter
Input voltage : 90 ~ 270Vac, 47~63Hz
Output voltage : 12Vdc
Rated output Power : 6W
Environment
Temperature : 0 ~ 50℃
Total Mass : 0.72 Kg or so.
To Next Page
Loading...