EasyManua.ls Logo

Inboard M1 - PRODUCT MAINTENANCE AND CARE; HOW TO REPLACE REAR REV WHEELS; BATTERY USE AND STORAGE

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Temperature: Storing, charging, and riding in temperatures close to the
median of the recommended temperature range improves range. Riding
in colder temperatures reduces range significantly.
Battery Condition: Properly charged and maintained batteries provide
greater range. Old, cold, heavily used, or poorly maintained batteries
provide less range.
HOW TO REPLACE REAR REV WHEELS
BATTERY USE AND STORAGE
Remove screws (3)
Remove Lock Ring
Remove REV Wheel
Slide on new REV Wheel
Set Lock Ring into place
Tighten screws into screw holes
(3) by hand & apply LOCTITE 243
Medium Strength
STEP 1 STEP 2
NOTE: Do not tamper with or try and open Manta Drive assembly. Warranty void if opened
Charge ONLY with approved Inboard charger.
Your PowerShift Battery is designed specifically for your M1. Do not at-
tempt to use with any other device.
Do not attempt to open your battery. The warranty will be void if opened.
Please recycle at an approved facility.
Store in a dry area between 0-40°C / 32-104°F
MAINTENANCE
Terrain: Riding on smooth, flat terrain improves range, and riding on hilly
terrain and unpaved surfaces reduces range.
Speed and Riding Style: Riding at a consistent, moderate speed will in-
crease range. Excessive starting, stopping, acceleration, and deceleration
reduces range.
Rider Weight and Cargo: Lighter riders with less cargo experience better
range than heavier riders with more cargo.
Maximum range distances are provided in the Technical Specifications section.
The range of your Inboard M1 is aected by many variables, including:
MAXIMIZING RANGE
| 21