EasyManua.ls Logo

Indesit BTW A51052 - Cleaning the Water Filter; Indicators; Indicator Lights Explained; Hints and Tips

Indesit BTW A51052
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
User manual
11
11. Programme End
The door can only be opened when the “Door locked
indicator light turns o.
Turn the programme selector to the “OFF“ position and
close the water tap.
Open the lid and drum and unload the machine.
Leave the lid open for some time to allow the interior
of the machine to dry.
After about a quarter of an hour, the washing machine
will switch o completely to save energy.
INDICATORS
Washing phase
indicator
This indicator shows the current programme phase, running
from left to right through Prewash, Wash, Rinse, Spin/Drain. The
illuminated indicator light shows which phase is in progress.
1 3 6 9 12
Delay timer
indication
Press the “Delay Timer” button several times to select a delay time
of 1, 3, 6, 9 or 12 hours. The corresponding indicator lamp lights
up.
Люк
заблоковано
Door locked
This indicator will light up
After start of a programme
The indicator lights to show that the lid can not be opened
Сервіс Service
Failure: Call After-sales service
Refer to Troubleshooting section
If the indicator persist, call After-sales service
Очистити
фільтр
Clean lter
Failure: Water lter clogged
Water cannot be drained; water lter might be blocked
Немає води Water tap closed
Failure: No water
No or not sucient inlet water.
HINTS AND TIPS
WASH SYMBOLS ON GARMENT LABELS
The value given in the tub symbol is the maximum
temperature possible for washing the garment.
Normal mechanical action
Reduced mechanical action
Much reduced mechanical action
Hand wash only
Do not wash
CLEAN THE WATER FILTER REGULARLY
This is needed to prevent the lter from blocking and
preventing the water from draining correctly.
SAVING ENERGY AND PROTECTING THE
ENVIRONMENT
Keeping within the load limits indicated in the
PROGRAMME CHART“ will optimise energy, water and
detergent consumption and reduce washing times.
Do not exceed the detergent quantities recommended by
the detergent manufacturer.
Save energy by using a 60 °C instead of a 90 °C wash
programme, or by using a 40 °C instead of a 60 °C wash
programme. We recommend using the “Eco Cotton the
60 °C programme for cotton garments, which is longer, but
uses less energy.
To save energy and time when washing, select highest
spin speed available for the programme to reduce the
residual water remaining in the garments at the end of the
wash cycle.
Pretreat any stains with an appropriate stain remover,
or else dampen any dried-on stains with water prior
to washing, as this will reduce the need to use a high
temperature wash programme.

Related product manuals