What to do if Indesit MOON 2006 does not drain?
If your Indesit Washer isn't draining, several factors could be at play. First, the function might be inhibited. You should also check the drain pump and filter for any blockages. Verify the voltage reaching the drain pump and ensure the selected program isn't designed to block draining. Lastly, ensure the building drain wall connection is free from obstructions.
Why Indesit MOON 2006 Washer fails to fill with water?
If your Indesit Washer isn't filling with water, start by checking if the water filling tap is closed or if there's low water mains pressure. Also, the solenoid valve might be clogged or not receiving power.
How to troubleshoot Indesit MOON 2006 that fails to switch on?
If your Indesit Washer fails to switch on, check the electrical socket outlet. Also, examine the door microdelay switch and the display PCB.
What to check if Indesit MOON 2006 Washer drum does not turn?
If the drum of your Indesit Washer isn't turning, check the drive belt and the motor.
What to do if Indesit MOON 2006 Washer does not wash efficiently?
If your Indesit Washer isn't washing efficiently, consider whether the wash temperature is unsuitable, if you're using insufficient detergent, or if the selected program is inappropriate for the load.
Why Indesit MOON 2006 performs wash movements but not spin cycle?
If your Indesit Washer's motor performs wash movements but not the spin cycle, the load might be severely unbalanced, or there could be bad contact on the terminal board.
How to fix a noisy spin cycle on Indesit MOON 2006 Washer?
A noisy spin cycle in your Indesit Washer could be due to several reasons. The load might be unbalanced. You should also check the bearing, if the drive belt is worn, if the beater bars or the counterweight are loose.
What causes Indesit MOON 2006 to fill continuously?
If your Indesit Washer fills continuously, it could be due to a damaged solenoid valve. Another possible cause is that the drain hose is too low. You may also need to check the pressure switch, air trap or pressure switch tube.
Why Indesit Washer motor does not run?
If the motor of your Indesit Washer doesn't run, check the pressure switch, the motor winding, the motor terminal board and PCB. Also, ensure that the motor is receiving power.
Why does foam remain at end of washing cycle in Indesit Washer?
If foam remains at the end of the washing cycle in your Indesit Washer, it could be due to using too much detergent or a defective drain.
Defines the model code structure, breaking down each character's meaning.
Details the control panel layout and identifies each button and indicator.
Provides detailed specifications such as capacity, dimensions, water and electrical connections.
Explains the energy efficiency rating, consumption, and performance metrics.
Lists key technological innovations and features of the washing machine.
Guides on operating the machine, selecting programmes, and using pause/reset functions.
Details specific wash programmes and provides a summary table of their parameters.
Visual identification of major internal and external components of the washing machine.
Presents the main electrical wiring diagram for the appliance.
States that the machine does not feature the Demo Mode function.
Explains the Autotest procedure using the Hardware Key and its sequence.
Details fault codes, LED indications, causes, and corrective actions for common errors.
Provides a guide to diagnose and resolve common problems and their causes.
Step-by-step instructions for disassembling and reassembling various machine parts.
Diagrams showing disassembled parts of the appliance body, mobile assembly, and electronics.
General| Loading type | Front Load |
|---|---|
| Maximum spin speed | 1000 RPM |
| Capacity | 6 kg |
| Spin Speed | 1000 rpm |
| Energy Rating | A |
| Type | Washing Machine |
| Programs | Cotton, Synthetics, Delicates, Wool |
| Dimensions (H x W x D) | 850 x 595 x 535 mm |
To Next Page