EasyManua.ls Logo

Indesit MOON 2006 - Drain Pump; Conductivity Sensor

Indesit MOON 2006
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION
9
GB
Service Manual
MOON - 2006
Linguage
English
Edition
2006.06.12
DRAIN PUMP:
The drain pump is equipped with a new self-cleaning
bayonet fi lter which prevents large objects such as
coins, buttons, etc. from ending up inside the pump,
thus avoiding blockages and noisy operation.
It is located at the bottom right-hand side of the
machine. To access the fi lter, simply turn the fi lter
cover anti-clockwise until the bayonet coupling
releases, allowing access to the fi lter.
CONDUCTIVITY SENSOR:
The Moon washing machine is equipped with a new
Conductivity Sensor located on the plastic tub next
to the Oko hose, as shown in the photograph.
The Conductivity Sensor manages the “30 min” or
“Daily” programme. Its functions are:
1. If the wash load consists of clothes to be washed
without detergent, the machine will load water
and then test the level of alkalinity in the wash
water; if no alkalinity is present, the machine will
activate the standard “30 min” wash cycle;
2. If, on the contrary, the sensor detects that the
machine has been loaded with laundry plus
detergent, it will activate two 15 minute rinse
cycles.
NB: The conductivity sensor is provided with
a gasket to guarantee seal and prevent water
leaks.
A plastic cover has been fi tted on the fi lter to prevent
hands from coming into contact with the electrical
part of the pump, which must not be eliminated.

Related product manuals