13 of 33
Service Manual UK
Indesit
Company
English
INSTALLATION continued..
Fix the hob as follows:
1. Use short flat-bottomed screws to fix the 4 alignment springs in the holes provided at the central
point of each side of the hob.
2. Place the hob in the cavity, make sure it is in a central position and push down on the whole
perimeter until the hob is stuck to the supporting surface.
NOTES: -
The screws for the alignment springs must remain accessible.
In order to adhere to safety standards, the appliance must not come into contact with electrical parts
once it has been installed.
All parts which ensure the safe operation of the appliance must not be removable without the aid of a
tool.
To Next Page
Loading...
