Need help?Do you have a question about the Indesit VIX644CE and is the answer not in the manual?
Crucial safety guidelines for servicing and handling the appliance.
Explains how to interpret model identification codes.
Provides an overview of the appliance model and its features.
Details key technical data, dimensions, and electrical requirements.
Instructions on safe and environmentally sound disposal of the appliance.
Specific guidance on WEEE directive compliance for old appliances.
Lists accessories and components included with the appliance.
Crucial warnings and precautions for safe operation and use.
Specific instructions for handling kitchen fires involving oil.
General advice and important recommendations for safe and proper usage.
Broad safety guidelines covering installation, usage, and user capabilities.
Guidelines for placing the appliance correctly within cabinetry.
Specifics for installing the hob into furniture, including ventilation.
Minimum distances and airflow requirements for proper cooling.
Instructions on securing the hob to the supporting surface.
Steps for fitting the safety washer during installation.
Detailed steps on how to secure the hob in place.
Wiring instructions for single-phase power supply.
Wiring for different mains supply configurations.
Final connection steps and safety switch requirements.
Details the control panel layout and functions.
Explains the appliance's low power consumption features.
Initial setup and basic operation guidelines.
Explains common sounds produced by induction technology.
Describes the touch control calibration process related to ambient light.
Steps for powering on and unlocking the hob.
How to adjust the appliance's maximum power limit.
How to activate and set power levels for cooking zones.
Explanation of the rapid heating feature.
How to deactivate individual cooking zones.
Instructions for programming cooking times.
How to enable and disable the child lock feature.
Procedure for turning the appliance off.
Guidance on selecting and using appropriate cookware for induction.
How the pan detection system works.
Mechanism to prevent overheating.
Automatic shut-off based on operating time.
Explains what the buzzer sounds signify.
How error codes are displayed and what they mean.
Guidance on using different heat levels for various cooking tasks.
Detailed steps for cleaning the hob surface and frame.
Specific advice for cleaning the metal frame.
Instructions on how to take the hob apart for servicing or cleaning.
Troubleshooting for power management issues.
Troubleshooting for pan detection errors.
Handling residual heat warnings.
Diagnosing issues with reduced heating power.
Troubleshooting overtemperature faults.
Troubleshooting NTC sensor faults.
Troubleshooting NTC sensor faults.
Troubleshooting heatsink sensor faults.
Troubleshooting heatsink sensor faults.
Diagnosing communication issues.
Troubleshooting mains connection issues.
Troubleshooting NTC sensor faults.
Troubleshooting NTC sensor faults.
Diagnosing overvoltage issues.
Troubleshooting safety key faults.
Troubleshooting safety key faults.
Troubleshooting UI overtemperature.
Troubleshooting UI sensor faults.
Troubleshooting EEPROM errors.
Troubleshooting safety key faults.
Troubleshooting light condition errors affecting calibration.
Troubleshooting UI sensor faults.
Troubleshooting safety key faults.
Visual representation of internal wiring connections.
Essential safety precautions before disassembling.
Step-by-step guide to removing the hob top assembly.
Procedure for safely removing the induction plate.
Steps to remove the touch control printed circuit board.
Procedure for removing the main power board.
Instructions for dismantling and accessing the cooling fan.
Steps to remove the radio interference suppressor.
Procedure for removing the mains terminal block.
To Next Page
General