Index MS40-6 - User Manual

84 pages

Save Page as PDF

To Next Page

Maintenance Instructions

MS40-6

OPERATING INSTRUCTIONS

Maintenance Instructions

DIM021EN - 03.06.2020

03.06.2020/Sp/Wartungsanleitung/20054736

Main Page

Table of Contents3
Preface5
General Notes5
Safety Instructions7
Service Interval - Care Activities11
Maintenance Summary - Care Activities12
AM010 - Checking the Work Area Door and Window Pane13
AM016 - Check the Pressures on the Machine15
AM026 - Check Hydraulic and Lubrication Systems16
AM030 - Visual Inspection of All Fluid Lines and Electrical Cables19
AM032 - Check Pre-Pressure of Pressure Accumulators21
AM035 - Replace the Breathing Filter at the Filler Neck of the Hydraulic Fluid Tank23
AM040 - Check Pneumatic System (Visual Inspection)25
AM055 - Cleaning of the Machine27
AM065 - Check Stäubli Robot29
AM080 - Clean and Lubricate Chucks30
AM090 - Check Work Area Light (Visual Inspection)31
AM100 - Clean Cooling Lubricant Outlet on Spindle Carrier32
AM110 - Check the Window Pane at the Level Sensor of the Vacuum Rotation Filter34
AM125 - Check Coolant36
AM130 - Removing Clamping Element Holder38
AM280 - Clean Collets and Base Body41
AM335 - Remove, Inspect, Lean and Reinstall the Spindle Liner Tubes45
AM340 - Visual Inspection of the Fire Extinguishing System47
AM370 - Checking Gas Springs on the Control Cabinet Door48
Service Interval - 2.000 Operating Hours51
Maintenance Summary - 2.000 Operating Hours52
CM010 - Checking the Inspection and Maintenance Schedules/Logs53
CM026 - Check Hydraulic System54
CM046 - Replace Hydraulic Fluid Filters57
CM060 - Check Pre-Pressure of Pressure Accumulators59
CM080 - Inspection of Water Cooling Equipment (Option)61
CM140 - Inspection of the Pneumatic System62
CM180 - Checking the Window Pane65
CM270 - Check MS Guard Switch/Interlock66
CM290 - Check IEMCA Loading and Unloading System67
CM330 - Check Gas Springs on the Control Cabinet Door, Replace if Necessary68
CM480 - Check Operating Panel for General Condition70
Service Interval - 5 Years71
Maintenance Summary - 5 Years72
IM020 - Replace the Pressure Accumulator73
Service Interval - 8 Years77
Maintenance Summary - 8 Years78
JM010 - Replacing the Window Pane79

Need help?

Do you have a question about the Index MS40-6 and is the answer not in the manual?

Index MS40-6 Specifications

General

Brand	Index
Model	MS40-6
Category	Lathe
Language	English

Related product manuals

Index MS40-6 - User Manual

Table of Contents

Index MS40-6 Specifications

Related product manuals