AM090 - Check work area light (visual inspection)
Orientation
To ensure even illumination of the working areas in the machine, work area lights
are installed in the work area.
These enable safe working and must therefore be checked regularly. Maintenance
and repair work on damaged lamps may only be carried out by a qualified
electrician or must be checked by the manufacturer or replaced
immediately. .
Requirement
Service and maintenance are to be carried out according to the
manufacturer’s specifications.
Procedure
1.
For extended periods of downtime or maintenance time,
cleaning of the light surfaces is recommended. This prevents
premature clouding of the light surfaces.
Clean light surfaces. Only use a cloth soaked in normal household detergent.
2. Check all lamps (visual inspection).
3.
Example: Work lamp (Waldmann)
Check the lamps for damage. If cooling lubricant has already penetrated into
the work area light, the lamp must be replaced.
Maintenance Summary - Care activities
27
Maintenance Instructions
MS40-6
DIM021EN - 03.06.2020
To Next Page
Loading...
