AM335 - Remove, inspect, lean and reinstall the spindle liner tubes
Carrying out the maintenance activities described below requires
special knowledge. For this reason, these maintenance activities
must only be carried out by staff that has received adequate training
by the machine manufacturer!
Orientation
Always grease the spindle liner tubes before reinstalling them.
Only heat-resistant greases may be used.
The spindle liner tubes must be periodically removed and inspected. Chips in the
clamping tube may damage the spindle liner tubes. Hainbuch offers various tools for
removal and installation.
Example: Manual changing device (Hainbuch)
Spindle liner tube and bushing with mounting tool
Maintenance Summary - Care activities
44
Maintenance Instructions
MS40-6
DIM021EN - 03.06.2020
To Next Page
Loading...
